Siemens SIMATIC TIM 3V-IE DNP3 System Manual page 157

Properties - Local Connection
This dialog visualizes the properties of a local LAN connection of a CPU and allows the
following properties to the selected:
● CPU modules with X connections / P bus connections:
– The
– The
● CPU modules with PBC connections:
– The
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
dialog for the CPU
length of the send buffer [bytes]
Range of values: 76 ... 65382 bytes
Default: 760 bytes
This parameter is not relevant for PBC connections.
This parameter cannot be set for a DNP3 CPU.
Connection monitoring time [s]
dummy messages are sent to check the connection.
Range of values: 1 ... 32 s
Default: 5 s
This parameter cannot be set for a DNP3 CPU.
Connection monitoring time [s],
Range of values: 1 ... 32 s
Default: 5 s
This parameter cannot be set for a DNP3 CPU.
Properties - Local Connection
Image 6-9
The SINAUT Configuration Tool
6.5 The Subscriber Administration
for these connections
; in other words, the time that must elapse before
dialog (CPU)
157