Siemens SIMATIC TIM 3V-IE DNP3 System Manual page 282

Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
Event ID Detailed
(hex) event
(hex)
F560 0068
F560 0069
F360 006A
F560 006B
F560 006C
F560 006D
F560 006E
F560 006F
F560 0070
F560 0071
F560 0072
F560 0073
F560 0074
F560 0075
F560 0076
F560 0077
F560 0078
F560 0079
F560 007A
F560 007B
F560 007C
F560 007D
F560 007E
F560 007F
F560 0080
F560 0081
F360 0082
F560 0083
F360 0084
F560 0085
F560 0086
F560 0087
F360 0088
F360 0089
F560 008A
F560 008B
F560 008C
F560 008D
F560 008E
F560 008F
282
Meaning
Dongle flag not found in catalog.
EXE loader not found in catalog.
Internal / external WAN interface: Driver not released.
Internal / external WAN interface: Error sending the load job for a driver.
Internal / external WAN interface: Error loading the basic task of a driver.
Internal / external WAN interface: Error creating the basic task of a driver.
Internal / external WAN interface: Error receiving the task ID of a driver.
Internal / external WAN interface: Error starting the basic task of a driver.
WAN SDB could not be opened.
WAN SDB could not be found.
Error sending the load job for the clock driver.
Error loading the basic task of the clock driver.
Error creating the basic task of the clock driver.
Error receiving the task ID of the clock driver.
Error starting the basic task of the clock driver.
WAN SDB does not start with the
Not enough memory available.
Error creating the global message memory.
Error sending the load job for the routing program.
Error loading the basic task of the routing program.
Error creating the basic task of the routing program.
Error receiving the task ID of the routing program.
Error creating the main task of the routing program.
Routing tables were not created within the specified time.
WAN driver was not installed within the specified time.
Unknown parameter block in WAN SDB.
Startup of module completed.
Flag group unknown.
RAM drive was created.
Error creating RAM drive.
Error in memory analysis in HEAP.
Error installing the clock driver. No message received at end of installation.
Message of the message and HEAP memory initialized on the TIM.
Routing SDB could not be found.
Routing SDB could not be opened.
Routing SDB starts with incorrect subnet block ID.
No memory available for routing function.
Incorrect block ID detected in routing SDB.
Error sending a job to the LAN task.
Installation of the routing function was aborted.
TIM
parameter block.
System Manual, 12/2015, C79000-G8976-C253-04
TIM DNP3