Table 2-13 Tracking Oscillator Range Centering - HP 8560E Service Manual

14.Adjust A10C3 TRK OSC CTR until the frequency counter reads 300
15.Repeat steps 7 through 14 at least once more until no further
16.Press
17.Reinstall A10 in the HP 8560E/EC.
Table 2-13 Tracking Oscillator Range Centering
N
1
2
3
4
5
Chapter 2
MHz ±500 Hz.
adjustment of A10C3 TRK OSC CTR is necessary.
to turn the spectrum analyzer off. Replace the dust cap
LINE
screw on A10. Disconnect all cables from A10.
F1 (MHz) F2 (MHz)
18. Tracking Oscillator Adjustment (Option 002)
F TRACK ADJ DAC Settings
center
(MHz)
COARSE
Adjustment Procedures
FINE
125