About This Manual - Thermo Scientific Corona Veo Operating Manual

1 • Using this Manual
1.1

About this Manual

Page 12
This manual describes the functional features and operating principle of
your Thermo Scientific™ Corona™ Veo™ and Corona Veo RS detector
and provides instructions for installation, set up, start up, shut down,
operation, maintenance and troubleshooting.
The layout of this manual is designed to provide quick reference to the
sections of interest to the user. To obtain a full understanding of your
detector, read this manual thoroughly.
This manual also contains safety messages, precautionary statements,
and special notices that can prevent personal injury, damage to the
detector, or loss of data when followed properly.
Note the following:
•
The detector configuration may vary; therefore, not all descriptions
necessarily apply to your particular detector.
•
If some detail applies to only one model or variant, the model or
variant is identified by name.
•
Illustrations in this manual are provided for basic understanding.
They can vary from the actual model of the detector or component.
However, this does not influence the descriptions. No claims can be
derived from the illustrations in this manual.
The descriptions in this manual assume that the detector is installed in
the HPLC system stack. If this is not the case, additional hardware is
required and must be ordered separately. The information in this
manual applies correspondingly.
Charged Aerosol Detectors Corona Veo (RS) Operating Manual