Using the transmitter display
5.
6.
B.4
Display codes for process variables
Table B-2:
Code
Standard
DENS
TEMP
EXT T
DGAIN
UCALC
Viscosity measurement
DYNV
KINV
RVISC
SRVIS
API referral
RDENS
B.5
Codes and abbreviations used in display menus
Table B-3:
Code
%
156
To save the displayed value to transmitter memory, activate Scroll and Select
simultaneously and hold until the display changes.
•
If the displayed value is the same as the value in transmitter memory, you will be
returned to the previous screen.
•
If the displayed value is not the same as the value in transmitter memory, SAVE/
YES? flashes on the display. Activate Select.
Switch back from exponential notation to decimal notation.
a. Activate Select until the E is flashing.
b. Activate Select until d is displayed.
c. Activate Select.
Display codes for process variables
Display codes for measurement units
Micro Motion
Definition
Line Density
Line Temperature
Line Temperature (External)
Drive Gain
User-Defined Calculation Output
Line Dynamic Viscosity
Line Kinetic Viscosity
Referred Viscosity
Secondary Referred Viscosity
Referred Density (API)
Measurement unit
Percent
®
Heavy Fuel Viscosity Meters (HFVM) Viscomaster
™