Leica TPS1200 Series Reference Manual page 186

GeoCOM Reference Manual
17.8.7 TMC_IfDataAzeCorrError – returning the status if an ATR error occurs
TMC_IfDataAzeCorrError ............................................................................................................................................................................................................................................................................ .................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... 2114
2114 ................................................................................................................................................................................................................................................................TMC_IfDataAze CorrError
C-Declaration
TMC_IfDataAzeCorrError(BOOLE& bAtrCorrectionError)
VB-Declaration
VB_TMC_IfDataAzeCorrError
ASCII-Request
%R1Q,2114:
ASCII-Response
%R1P,0,0:RC,bAtrCorrectionError[long]
Remarks
This function returns the status of the ATR correction of the last measurement. If you get a return code
GRC_TMC_ANGLE_NOT_FULL_CORR or GRC_TMC_ NO_FULL_CORRECTION from a measurement
function, this function indicates whether the returned data is missing a deviation correction of the ATR or not.
Parameters
BAtrCorrectionError
Return-Code Names and Return-Code Values
GRC_OK
See Also
TMC_IfDataIncCorrError
Example
GRC_TYPE
SYSTIME
TMC_INCLINE_PRG ePrgm;
double
TMC_DoMeasure(TMC_DEF_DIST);// execute single
WaitTime=500;// set max. wait time 500 [ms]
eProg=TMC_AUTO_INC;// set automatically incline prgm
Result=TMC_GetSimpleCoord(WaitTime, dCoordE,
switch(Result)
{
case GRC_TMC_NO_FULL_CORRECTION:
TMC_IfDataAzeCorrError(bAzeCorrError);
TMC_IfDataIncCorrError(bIncCorrError);
if(bAzeCorrError)
{
// coordinates are not corrected with the Aze-
// deviation correction
}
if(bIncCorrError)
{
// coordinates are not corrected with the
// incline correction
}
case GRC_OK:
case GRC_TMC_ACCURACY_GUARANTEE:
// in this cases are the coordinates
// available
break;
default:
// in all other cases are the coordinates not
// valid and set to 0
// further errorhandling
Leica TPS1200 – Version 1.50
(bAtrCorrectionError As Long)
Out
0
Result;
WaitTime;
dCoordE,dCoordN,dCoordH;
// dist measurement
dCoordN, dCoordH,eProg);
Theodolite Measurement and Calculation – TMC
Flag, if ATR correction error occurred or not
: no error occurred
FALSE
: last data record not
TRUE
deviation
Execution successful.
corrected with the ATR-
186