Leica TPS1200 Series Reference Manual page 142

GeoCOM Reference Manual
EDM Measurement Mode
enum EDM_MODE {
EDM_MODE_NOT_USED
EDM_SINGLE_TAPE
EDM_SINGLE_STANDARD = 2, // IR Standard
EDM_SINGLE_FAST
EDM_SINGLE_LRANGE
EDM_SINGLE_SRANGE
EDM_CONT_STANDARD
EDM_CONT_DYNAMIC
EDM_CONT_REFLESS
EDM_CONT_FAST
EDM_AVERAGE_IR
EDM_AVERAGE_SR
EDM_AVERAGE_LR
EDM_PRECISE_IR
EDM_PRECISE_TAPE
};
EDM Frequency
typedef struct TMC_EDM_FREQUENCY {
dFrequency; // EDM's frequency in Hz
double
SYSTIME Time;
};
Calculated Co-ordinates based on a Distance Measurement
struct TMC_COORDINATE {
double dE;
double dN;
double dH;
SYSTIME CoordTime;
double dE_Cont;
double dN_Cont;
double dH_Cont;
SYSTIME CoordContTime;
};
Corrected Angle Data
struct TMC_HZ_V_ANG {
double dHz;
double dV;
};
Corrected Angle Data with Inclination Data
struct TMC_ANGLE {
double dHz;
double dV;
double dAngleAccuracy;
SYSTIME AngleTime;
TMC_INCLINE Incline;
TMC_FACE eFace;
};
Offset Values for Correction
struct TMC_OFFSETDIST {
double dLengthVal; // Aim offset length
double dCrossVal;
double dHeightVal; // Aim offset height
};
Inclination Data
struct TMC_INCLINE {
double dCrossIncline;
double dLengthIncline;
double dAccuracyIncline; // Inclination accuracy [rad]
SYSTIME InclineTime;
};
System Time
typedef long SYSTIME;
Leica TPS1200 – Version 1.50
= 0, // Init value
= 1, // IR Standard Reflector Tape
= 3, // IR Fast
= 4, // LO Standard
= 5, // RL Standard
= 6, // Standard repeated measurement
= 7, // IR Tacking
= 8, // RL Tracking
= 9, // Fast repeated measurement
= 10,// IR Average
= 11,// RL Average
= 12, // LO Average
// IR Precise (TS30, TM30)
= 13,
= 14 // IR Precise Reflector Tape (TS30, TM30)
// Time of last measurement
// E-Coordinate [m]
// N-Coordinate [m]
// H-Coordinate [m]
// Timestamp of dist. Measurement [ms]
// E-Coordinate (continuously) [m]
// N-Coordinate (continuously) [m]
// H-Coordinate (continuously) [m]
// Timestamp of measurement [ms]
// Horizontal angle [rad]
// Vertical angle [rad]
// Horizontal angle [rad]
// Vertical angle [rad]
// Accuracy of angles [rad]
// Moment of measurement [ms]
// Corresponding inclination
// Face position of telescope
// Aim offset cross
// Transverse axis incl. [rad]
// Longitud. axis inclination [rad]
// Moment of measurement [ms]
// time since poweron [ms]
Theodolite Measurement and Calculation – TMC
142