Functions - Leica TPS1200 Series Reference Manual

GeoCOM Reference Manual

16.3 FUNCTIONS

16.3.1 SUP_GetConfig – getting the power management configuration status
SUP_GetConfig.......................................................................................................................................................................................................................................................................... .... .................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... 14001
14001...............................................................................................................................................................................................................................................................SUP_GetConfig
C-Declaration
SUP_GetConfig(ON_OFF_TYPE & Reserved,
VB-Declaration
VB_SUP_GetConfig(Reserved As Long,
ASCII-Request
%R1Q,14001:
ASCII-Response
%R1P,0,0:RC, Reserved [long], AutoPower[long], Timeout[long]
Remarks
The returned settings are power off configuration and timing.
Parameters
Reserved
AutoPower
Timeout
Return-Code Names and Return-Code Values
GRC_OK
See Also
SUP_SetConfig
Example
see
SUP_SetConfig
Leica TPS1200 – Version 1.50
SUP_AUTO_POWER &AutoPower,
SYSTIME &Timeout)
AutoPower As Long,
Timeout As Long)
Out
Out
Out
0
Reserved
Current activated shut down mechanism
The timeout in ms. After this time the device switches in the
mode defined by the value of
activity (press a key, turn the device or communication via
GeoCOM) occurs.
Execution successful.
Supervisor – SUP
when no user
AutoPower
138