Leica TPS1200 Series Reference Manual page 184

GeoCOM Reference Manual
17.8.6 TMC_GetSimpleCoord - getting cartesian coordinates
TMC_GetSimpleCoord.............................................................................................................................................................................................................................................................................. ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ 2116
2116 ................................................................................................................................................................................................................................................................TMC_GetSimpl eCoord
C-Declaration
TMC_GetSimpleCoord( SYSTIME WaitTime,
VB-Declaration
VB_TMC_GetSimpleCoord(
ASCII-Request
%R1Q,2116:WaitTime[long],eProg[long]
ASCII-Response
%R1P,0,0:RC,dCoordE[double], dCoordN[double], dCoordH[double]
Remarks
This function gets the cartesian co-ordinates if a valid distance exists. The parameter
max wait time in order to get a valid distance. If after the wait time a valid distance does not exist, the function
initialises the parameter for the co-ordinates (
will require incline results. With the parameter
use the pre-determined plane to calculate an inclination, or use the automatic mode wherein the system decides
which method is appropriate (see 15.1.1).
Parameters
WaitTime
eProg
dCoordE
dcoordN
dcoordH
Return-Code Names and Return-Code Values
GRC_OK
GRC_TMC_ACCURACY_GUARANTEE
GRC_TMC_NO_FULL_CORRECTION
GRC_TMC_ANGLE_OK
GRC_TMC_ANGLE_NO_ACC_
GUARANTY
GRC_TMC_ANGLE_NO_FULL_
CORRECTION
GRC_TMC_DIST_ERROR
GRC_TMC_DIST_PPM
Leica TPS1200 – Version 1.50
double &dCoordE,
double& dCoordN,
double& dCoordH,
TMC_INCLINE_PRG eProg)
ByVal WaitTime As Long,
dCoordE As Double,
dCoordN As Double,
dCoordH As Double,
ByVal eProg As Long)
E,N,H
eProg
In Max. wait time to get a valid distance [ms].
In Inclination sensor measurement mode.
Out Easting.
Out Northing.
Out Orthometric height.
0 Execution successful.
1284 Accuracy is not guaranteed, because the result are consist of
measuring data which accuracy could not be verified by the
system. Co-ordinates are available.
1283 The results are not corrected by all active sensors. Co-
ordinates are available.
In order to secure which correction is missing use the both
functions
TMC_IfDataIncCorrError
1285 Angle values okay, but no valid distance. Co-ordinates are
not available.
1289 Only the angle measurement is valid but its accuracy cannot
be guaranteed (the tilt measurement is not available).
1288 No distance data available but angle data are valid. The return
code is equivalent to the
and relates to the angle data. Co-ordinates are not available.
Perform a distance measurement first before you call this
function.
1292 No measuring, because of missing target point, co-ordinates
are not available.
Aim target point and try it again
1291 No distance measurement respectively no distance data
because of wrong EDM settings. Co-ordinates are not
Theodolite Measurement and Calculation – TMC
) with 0 and returns an error. For the co-ordinate calculate
you have the possibility to either measure an inclination,
TMC_IfDataAzeCorrError
GRC_TMC_NO_FULL_CORRECTION
defined the
WaitTime
and
184