Leica TPS1200 Series Reference Manual page 51

GeoCOM Reference Manual
break;
case GRC_COM_TIMEDOUT:
//increase timeout
hrc = COM_GetTimeOut(nComTimeOut);
nComTimeOut=__min(nComTimeOut+=5, 60);
hrc = COM_SetTimeOut(nComTimeOut);
break;
case GRC_AUT_ANGLE_ERROR:
// error within angle measurement:
// switch inclination correction off
hrc = TMC_SetInclineSwitch(OFF);
break;
default:
// precise position not possible
TryAgain = FALSE;
if (rc == GRC_AUT_INCACC)
{
//Position successful but not precise
}
else
{
// Positioning not successful
// here further error analyse possible
}
break;
}
}
rc = AUS_SetUserAtrState(OFF); // Note: LOCK mode will
hrc = COM_SetTimeOut(nOldComTimeOut);// Set old time-
Leica TPS1200 / TS30 / TM30 – Version 1.50
// be automatically
// reseted !
// out
Automation - AUT
51