Leica TPS1200 Series Reference Manual page 199

GeoCOM Reference Manual
GRC_BMM_MEM_ERROR
GRC_BMM_CHARSET_USED
GRC_BMM_CHARSET_SAVED
GRC_BMM_INVALID_ADR
GRC_BMM_CANCELANDADR_ERROR
GRC_BMM_INVALID_SIZE
GRC_BMM_CANCELANDINVSIZE_ERROR
GRC_BMM_ALL_GROUP_OCC
GRC_BMM_CANT_DEL_LAYERS
GRC_BMM_UNKNOWN_LAYER
GRC_BMM_INVALID_LAYERLEN
COM
RetCodeName
GRC_COM_ERO
GRC_COM_CANT_ENCODE
GRC_COM_CANT_DECODE
GRC_COM_CANT_SEND
GRC_COM_CANT_RECV
GRC_COM_TIMEDOUT
GRC_COM_WRONG_FORMAT
GRC_COM_VER_MISMATCH
GRC_COM_CANT_DECODE_REQ
GRC_COM_PROC_UNAVAIL
GRC_COM_CANT_ENCODE_REP
GRC_COM_SYSTEM_ERR
GRC_COM_FAILED
GRC_COM_NO_BINARY
GRC_COM_INTR
GRC_COM_REQUIRES_8DBITS
GRC_COM_TR_ID_MISMATCH
GRC_COM_NOT_GEOCOM
GRC_COM_UNKNOWN_PORT
GRC_COM_ERO_END
GRC_COM_OVERRUN
GRC_COM_SRVR_RX_CHECKSUM_ERRR
GRC_COM_CLNT_RX_CHECKSUM_ERRR
GRC_COM_PORT_NOT_AVAILABLE
GRC_COM_PORT_NOT_OPEN
GRC_COM_NO_PARTNER
GRC_COM_ERO_NOT_STARTED
GRC_COM_CONS_REQ
GRC_COM_SRVR_IS_SLEEPING
GRC_COM_SRVR_IS_OFF
GRC_COM_NO_CHECKSUM
AUT
RetCodeName
GRC_AUT_TIMEOUT
GRC_AUT_DETENT_ERROR
Leica TPS1200 – Version 1.50
2311 0x907
2312 0x908
2313 0x909
2314 0x90A
2315 0x90B
2316 0x90C
2317 0x90D
2318 0x90E
2319 0x90F
2320 0x910
2321 0x911
3072 0xC00
Value HexVal
3072 0xC00
3073 0xC01
3074 0xC02
3075 0xC03
3076 0xC04
3077 0xC05
3078 0xC06
3079 0xC07
3080 0xC08
3081 0xC09
3082 0xC0A
3083 0xC0B
3085 0xC0D
3086 0xC0E
3087 0xC0F
3090 0xC12
3093 0xC15
3094 0xC16
3095 0xC17
3099 0xC1B
3100 0xC1C
3101 0xC1D
3102 0xC1E
3103 0xC1F
3104 0xC20
3105 0xC21
3106 0xC22
3107 0xC23
3108 0xC24
3109 0xC25
3110 0xC26
8704 0x2200
Value HexVal
8704 0x2200
8705 0x2201
Return-Code names and return-code values
Memory cannot be allocated
Character set still used
Charset cannot be deleted or is protected
Attempt to copy a character block outside the
allocated memory
Error during release of allocated memory
Number of bytes specified in header does not
match the bytes read
Allocated memory could not be released
Max. number of character sets already loaded
Layer cannot be deleted
Required layer does not exist
Layer length exceeds maximum
Description
Initiate Extended Runtime Operation (ERO).
Cannot encode arguments in client.
Cannot decode results in client.
Hardware error while sending.
Hardware error while receiving.
Request timed out.
Packet format error.
Version mismatch between client and server.
Cannot decode arguments in server.
Unknown RPC, procedure ID invalid.
Cannot encode results in server.
Unspecified generic system error.
Unspecified error.
Binary protocol not available.
Call interrupted.
Protocol needs 8bit encoded characters.
TRANSACTIONS ID mismatch error.
Protocol not recognizable.
(WIN) Invalid port address.
ERO is terminating.
Internal error: data buffer overflow.
Invalid checksum on server side received.
Invalid checksum on client side received.
(WIN) Port not available.
(WIN) Port not opened.
(WIN) Unable to find TPS.
Extended Runtime Operation could not be
started.
Att to send cons reqs
TPS has gone to sleep. Wait and try again.
TPS has shut down. Wait and try again.
No checksum in ASCII protocol available.
Description
Position not reached
Positioning not possible due to mounted EDM
199