Leica TPS1200 Series Reference Manual page 111

GeoCOM Reference Manual
11.4.9 CSV_GetIntTemp – getting the temperature
CSV_GetIntTemp............................................................................................................................................................................................................................................................................... ................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ 5011
5011 ................................................................................................................................................................................................................................................................CSV_GetIntTem p
C-Declaration
CSV_GetIntTemp(double &Temp)
VB-Declaration
VB_CSV_GetIntTemp(Temp As double)
ASCII-Request
%R1Q,5011:
ASCII-Response
%R1P,0,0:RC,Temp[long]
Remarks
Get the internal temperature of the instrument, measured on the Mainboard side. Values are reported in degrees
Celsius.
Parameters
Temp
Return-Code Names and Return-Code Values
GRC_OK
Example
GRC_TYPE rc;
double Temp;
rc = CSV_GetIntTemp(Temp);
// use temperature information
Leica TPS1200 – Version 1.50
Out
Instrument temperature [
0 Execution successful.
Central Services – CSV
°
C].
111