Leica TPS1200 Series Reference Manual page 147

GeoCOM Reference Manual
GRC_TMC_ANGLE_ERROR
GRC_TMC_BUSY
GRC_ABORT
GRC_SHUT_DOWN
See Also
TMC_DoMeasure
TMC_GetAngle5
Example
GRC_TYPE
TMC_HZ_V_ANG
double
// activate distance measurement
rc = TMC_DoMeasure(TMC_DEF_DIST, TMC_AUTO_INC);
if (rc == GRC_OK)
{
// distance measurement successful
rc = TMC_GetSimpleMea(3000, OnlyAngle,
if (rc == GRC_OK)
{
// use distance and angle values
else
{
// something with TMC_GetSimpleMea went wrong
}
else
{
// something with dist. measurement went wrong
}
Leica TPS1200 – Version 1.50
1290
1293
8
12
rc;
OnlyAngle;
SlopeDistance;
SlopeDistance, TMC_MEA_INC);
Theodolite Measurement and Calculation – TMC
Angle or inclination measurement error. Check inclination
modes in commands.
TMC resource is locked respectively TMC task is busy.
Distance and angle data are not available.
Repeat measurement.
Measurement through customer aborted.
System power off through customer.
147