Leica TPS1200 Series Reference Manual page 76

GeoCOM Reference Manual
8.3.6 BAP_SetPrismType2 – setting the default or user prism type
BAP_SetPrismType2 ............................................................................................................................................................................................................................................................................. ............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ 17030
17030...............................................................................................................................................................................................................................................................BAP_SetPrismT ype2
C-Declaration
BAP_SetPrismType ( BAP_PRISMTYPE ePrismType, char* szPrismName )
VB-Declaration
VB_BAP_SetPrismType(ByVal ePrismType As Long, ByVal szPrismName As String)
ASCII-Request
%R1Q,17030: ePrismType [long], szPrismName[string]
ASCII-Response
%R1P,0,0:RC
Remarks
Sets the default or user prism type for measurements with a reflector. It overwrites the prism constant, set by
TMC_SetPrismCorr
(BAP_SetUserPrismDef)
Parameters
ePrismType
szPrismName
Return-Code Names and Return-Code Values
GRC_OK
GRC_IVPARAM
See Also
BAP_GetPrismType2()
TMC_SetPrismCorr()
Example
-
Leica TPS1200 / TS30 / TM30 – Version 1.50
. For setting a user defined prism the prism has to be defined previously
In
In
0
2
Prism type.
Prism name. Required if prism type is
BAP_PRISM_USER.
Execution successful.
Prism type is not available, i.e. a user prism is not defined
Basic Applications – BAP
76