Deleting Files; Deleting Files In Memory - Adtech CNC9 Series Maintenance Manual

macro function. To cancel this fast programming operation, please press the "Cancel [CAN]" key to cancel this
operation when a macro function list pops up to ask for selection.
Note: The current way of macro function fast programming does not show the detailed description of the related
macro function and the use case program. If you want to display them, please set the macro
"MACROLISTTYPE" in the program. The macro variable MACROLISTTYPE can be defined as follows:
#define MACROLISTTYPE 0 //0 not display macro number comment interface 1 display macro number
comment interface
Caution
After all operations, press Reset to save the files, and the edit functions base on edit mode;
CNC96XX uses new file mapping technology, and allows loading processing files that exceed its memory.
Therefore, to ensure the system efficiency, you can only search and process, but can't edit the processing files
that exceed 2MB.

7.4 Deleting files

7.4.1 Deleting files in memory

Follow the steps below to delete the programs in system memory:
Press [File] to enter file operation interface;
Follow the prompt on the screen, select the file and press [Delete] to confirm and delete the file.
Caution
If the file has been loaded to work area, you need to restart the system to delete the program, or else the system
will report error.
The programs loaded into the work area can't be deleted, or else the system will report error.
ADTECH9 Series CNC Maintenance Manual
- 59 -