Adtech CNC9 Series Maintenance Manual page 148

Range
Unit
Authority
Default
Effective time
Note
025 X Pulse Logic Dir Mode (restart)
Y Pulse Logic Dir Mode (restart)
Z Pulse Logic Dir Mode (restart)
4 Pulse Logic Dir Mode (restart)
B Pulse Logic Dir Mode (restart)
C Pulse Logic Dir Mode (restart)
Range
Unit
Authority
Default
Effective time
Note
026 X Ext Home ELevel
Y Ext Home ELevel
Z Ext Home ELevel
A Ext Home ELevel
B Ext Home ELevel
C Ext Home ELevel
Range
: 0~1
: None
: Super Admin
: 1
: Restart
: Pulse command format setting is to configure the mode of output pulse.
The compatible command format of the motor driver should be known in
advance.
0 Pulse + pulse
1 Pulse + direction
: 0~1
: None
: Super Admin
: 1
: Restart
: Set pulse direction; if the controller direction is reverse to actual driver
direction, please modify this parameter to adjust the rotation direction of
motor.
: 0~1
- 143 -
ADTECH9 Series CNC Maintenance Manual