Adtech CNC9 Series Maintenance Manual page 2

Basic Information
This Manual is written by Adtech (Shenzhen) Technology Co., Ltd.
This Manual is mainly written by Tang Xiaobing.
This Manual was first released on June 27, 2016 with version No. A0101 and item number is applicable for all
the CNC9 series.
This Manual was revised on November 23, 2017 by Xu Yuwen with version No. A0102 and item number is
applicable for all the CNC9 series.
This Manual was revised on February 1, 2018 by Xu Yuwen with version No. A0103 and item number is
applicable for all the CNC9 series.
This Manual was revised on July 21, 2018 by Tang Xiaobing and Yao Lei with version No. A0104 and item
number is applicable for all the CNC9 series.
Copyright
Adtech (Shenzhen) Technology Co., Ltd. (Adtech hereafter) is in possession of the copyright of this manual.
Without the permission of Adtech, the imitation, copy, transcription and translation by any organization or
individual are prohibited. This manual doesn't contain any assurance, stance or implication in any form. Adtech
and the employees are not responsible for any direct or indirect data disclosure, profits loss or cause termination
caused by this manual or any information about mentioned products in this manual. In addition, the products and
data in this manual are subject to changes without prior notice.
All rights reserved.
Adtech (Shenzhen) Technology Co., Ltd.