Adtech CNC9 Series Maintenance Manual page 129

Unit
Authority
Default
Effective time
Note
053 Thread cutting acceleration pitch P (L series)
054 Thread cutting acceleration pitch D (L series)
055 Thread cutting backslide amount V (L series)
Range
Unit
Authority
Default
Effective time
Note
056 Reserved
Range
Unit
Authority
Default
Effective time
Note
057 System home ON
Range
Unit
Authority
Default
: mm/min
: Operation admin or higher
: 0
: Instant
: When Z-axis or A-axis is used as the cutting feed axis, it sets the
maximum G01 cutting feed rate.
: 0~100
: mm
: Operation admin or higher
: 0
: Instant
: To set the pitch length of acceleration segment of lathe CNC4620 system
thread cutting command G32 & G92, pitch length of the deceleration
segment and run-out amount. For details of G32 G92 instruction, see
CNC4620 programming manual.
: OFF ON
: None
: Operation admin
: OFF
: Instant
:
: No, Ask, Auto
: None
: Operation admin
: Non-return-to-zero
- 124 -
ADTECH9 Series CNC Maintenance Manual