Adtech CNC9 Series Maintenance Manual page 124

029 Inp AccSpeed Mode (1: linear acceleration/deceleration 0:S curve acceleration/deceleration)
030 'S' Speed Acceleration
Range
Unit
Authority
Default
Effective time
Note
031 HOME check enable for alarm
032 HOME Check Enable
Range
Unit
Authority
Default
Effective time
Note
033 X diameter prog enable (L series)
Range
Unit
Authority
Default
Effective time
Note
pauses and pre-reads, please increase this value to pre-read more
instructions.
:
:
: Operation admin or higher
:
: Instant
: Used to set the performance of S curve acceleration/deceleration
: 0~1
:
: Operation admin or higher
: 0, 1
: Instant
: Used to set whether prompt user to reset under certain conditions,
ensuring that the user has performed the operation;
If the value is set to 0, it won't check, and will run directly.
: 0~1
:
: Operation admin or higher
: 1 (L series) /0 (M series)
: Instant
: On lathe controller (L series), it is used to set whether the display and
programming of X axis are in radius or diameter;
- 119 -
ADTECH9 Series CNC Maintenance Manual