Adtech CNC9 Series Maintenance Manual page 126

Effective time
Note
040 This parameter is invalid (Standby)
041 Feed speed setting En
Range
Unit
Authority
Default
Effective time
Note
042 G00 Inp mode Enable
Range
Unit
Authority
Default
Effective time
Note
: Restart
: Used to configure Ethernet parameters, which shall comply with the
actual network settings, or else it can't be accessed normally.
After configured successfully, the user can perform the ping command
test on the PC of same network segment (same subnet mask) in the
intranet. The connection has error if the return overtimes. Please check
the physical connection.
The network environment requires independent NC network. Do not
connect to office network or Internet, because the broadcast in the
network and regular query of windows will block the network
communication of NC.
: 0~1
:
: Operation admin or higher
: 0
: Instant
: This parameter is used to modify the interpolation speed in
programming, making F programming invalid.
Used for the cases that processing codes requires ignoring F-value.
: 0~1
:
: Operation admin or higher
: 0
: Instant
: Used to set whether G00 instruction is moved with G01 mode
If G01 mode is used, the interpolation speed shall follow the setting of
minimum speed;
The acceleration is the interpolation acceleration.
- 121 -
ADTECH9 Series CNC Maintenance Manual