Adtech CNC9 Series Maintenance Manual page 127

043 Abnormal memory position jump enable
Range
Unit
Authority
Default
Effective time
Note
044 Pause Z to safe altitude
045 Pause A to safe altitude
Range
Unit
Authority
Default
Effective time
Note
046 Program home reference point enable
047 Mechanical home reference point enable
Range
Unit
Authority
Default
Effective time
Note
: 0~2 (corresponding OFF position memory, and status memory)
: None
: Operation admin or higher
: 0(OFF)
: Instant
: OFF: turn off this function
ON: turn on this function; when turned on, the processing ends because
the processing code has abnormal condition during processing; the
processing can be continued from the break point.
: OFF workpiece coordinates, machine tool coordinates
:
: Operation admin or higher
: 0
: Instant
: OFF: turn off this function
ON: turn on this function; when turned on, press the [Pause] key during
code processing or execute home operation in home mode, Z axis or A
axis lifts to the safe altitude set by P1.049 or P1.050 automatically
(workpiece coordinates or machine tool coordinates).
: 0~1
:
: Operation admin or higher
: 0
: Instant
: OFF: turn off this function
- 122 -
ADTECH9 Series CNC Maintenance Manual