Adtech CNC9 Series Maintenance Manual page 238

Note: The splitter terminal GND and +24V are used for power supply of external proximity sensor switch. Every
four input points share a group, and the maximum operating current of each group of power supply terminals is
200MA. Except common terminal 24V or GND is selected for IN08-IN15 by J34, the common terminal of all
other input points is +24V, and the status of the input point inverts when all input terminals are connected to
GND.
ET102A splitter function definition (Extended input)
Terminal
Area
No.
J38
POWER
J38
J38
J38 IN03-IN00
J38
Port Name Extended input of Standard system
+24V 24V power supply output terminal
GND 24V power supply output GND terminal
IN00 IN32 #1032
IN01 IN33 #1033
IN02 IN34 #1034
- 233 -
ADTECH9 Series CNC Maintenance Manual