Adtech CNC9 Series Maintenance Manual page 178

020 Analog Spindle Gear Numerator
021 Analog Spindle Gear Denominator
Range
Unit
Authority
Default
Effective time
Note
022 Tapping mode
Range
Unit
Authority
Default
Effective time
Note
023 Tapping acceleration/deceleration mode
Range
Unit
Authority
Default
Effective time
Note
This parameter will affect G74 and G84 tap instructions. Please set it
properly.
: 1~65535
: None
: Operation admin or higher
: 1
: Instant
: If the spindle has gear position, please set the hardware gear ratio to this
parameter, which hasn't been used in standard version, but may be used
in certain special conditions.
: INP ClosedLoop
: None
: Operation admin or higher
: CloseLoop
: Instant
: To set the system tapping mode to use interpolation or closed-loop
tapping
: S-shaped Trapezoid Index Sin
: None
: Operation admin or higher
: Trapezoid
: Instant
: To set the system closed-loop tapping acceleration and deceleration
modes: S, curve, trapezoida, index and trigonometric function
- 173 -
ADTECH9 Series CNC Maintenance Manual