Adtech CNC9 Series Maintenance Manual page 125

034 Default process plane
Range
Unit
Authority
Default
Effective time
Note
035 T code form (compensation number digits)(L series)
Range
Unit
Authority
Default
Effective time
Note
036 Local IP address
037 Subnet mask
038 Default gateway
Range
Unit
Authority
Default
: G17, 18, 19
:
: Operation admin or higher
: G18 (L series)/G17 (M series)
: Instant
: Set the default processing plane to XY or XZ; modify the default plane,
so that it isn't need to specify the modal plane value while programming,
and write plane related instructions directly in stead;
: 0~2
:
: Operation admin or higher
: 2 (L series)
: Instant
: Used to set the T value in tool change instruction on lathe controller (L
series); the latter digits indicate the compensation number. In some
conventional programming, people usually use two digits to specify the
compensation number used by corresponding tool number;
For example: T0801 M06 indicates changing the #8 tool and
compensating with #1 length.
:
:
: Operation admin or higher
: 192.168.0.123
255.255.255.0
192.168.0.1
- 120 -
ADTECH9 Series CNC Maintenance Manual