Adtech CNC9 Series Maintenance Manual page 163

055 X servo spindle zero speed in-position input port
Y servo spindle zero speed in-position input port
Z servo spindle zero speed in-position input port
A servo spindle zero speed in-position input port
B servo spindle zero speed in-position input port
C servo spindle zero speed in-position input port
Range
Unit
Authority
Default
Effective time
Note
056 X servo spindle speed reaches the input port
Y servo spindle speed reaches the input port
Z servo spindle speed reaches the input port
A servo spindle speed reaches the input port
B servo spindle speed reaches the input port
C servo spindle speed reaches the input port
Range
Unit
Authority
Default
Effective time
Note
10.4 Management parameter (P3.)
001 Select administrator mode
: 0~8888
:
: Super Admin
: Standard Pluse Mode
: Instant
: To set the zero speed in-position input detection port after servo stop
during servo spindle detection (Note: This parameter is used when the
servo spindle is configured for this axis)
: 0~8888
:
: Super Admin
: Standard Pluse Mode
: Instant
: To set the input detection port when the servo speed reaches during servo
spindle detection (Note: This parameter is used when the servo spindle is
configured for this axis)
- 158 -
ADTECH9 Series CNC Maintenance Manual