802.1Q Vlan Current Table Information - SMC Networks 6900FSC - annexe 5 Management Manual

U S
SING THE YSTEM
Parameter
MAX Supported VLANs Maximum number of VLANs that can be
Current Number of
VLANs Configured

802.1Q VLAN Current Table Information

This screen shows the current port members of each VLAN and
whether or not the port supports VLAN tagging. Ports assigned to a
large VLAN group that crosses several switches should use VLAN
tagging. However, if you just want to create a small port-based
VLAN for one or two switches, you can assign ports to the same
untagged VLAN. The current configuration is shown in the
following screen. 802.1Q VLAN Static Table Configuration
VID
--------------------------------------------------
Current Egress Ports
1. 111111111111 111111111111 1111 111111111111 111111111111 1111
2. ------------ ------------ ---- ------------ ------------ ----
3. ------------ ------------ ---- ------------ ------------ ----
4. ------------ ------------ ---- ------------ ------------ ----
Sorted by VID : 1
[Show]
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter
Deleted VLAN Entry
Counts
VID
2-48
C
ONFIGURATION
Description
configured on this switch.
The number of VLANs currently configured on
this switch.
802.1Q VLAN Current Table Information
=====================================
Deleted VLAN Entry Counts : 0
Creation Time
1 0 (0 day 0 hr 0 min 0 sec)
[More]
Description
The number of times a VLAN entry has been
deleted from this table.
The ID for the VLAN currently displayed.
P
ROGRAM
Current Untagged Ports
Port 1 Port 13 Port 49
<OK>
Status
Permanent