Configuring Community Names - SMC Networks 6724L2 - annexe 1 Management Manual

Configuring Community Names

The following figure and table describe how to configure the
community strings authorized for management access. Up to 5
community names may be entered.
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
Community Name
Access
Status
Note: The default community strings are displayed on the screen.
SNMP Communities
================
Community Name
1. public
2. private
3.
4.
5.
<APPLY>
Description
A community entry authorized for management
access.
Maximum string length: 19 characters
Management access is restricted to Read Only or
Read/Write.
Sets administrative status of entry to enabled or
disabled.
M
ANAGEMENT
Access
READ/WRITE
READ ONLY
<OK>
S M
ETUP ENU
Status
ENABLED
ENABLED
<CANCEL>
2-19