Installing the Power Cord Retaining Clips
The power cord retaining clips that come with the switch protect the power
cords from being accidentally unplugged from the unit.
1. To install a power cord retaining clip, position it the "u" part facing
down, press in the sides, and insert the ends of the clip into the holes
in the retaining bracket on the AC connector on the switch. Refer to
Figure 36.
Figure 36. Installing the Retaining Clip
Go to either "Powering On the Switches Individually" on page 94 or
"Powering On the Switches Simultaneously" on page 98.
x530 Series Installation Guide for Virtual Chassis Stacking
93