Figure 48: Installing At-Sp10Tw Cables - Allied Telesis x530 Series Installation Manual

Chapter 8: Cabling the Networking Ports
116
Figure 48. Installing AT-SP10TW Cables
5. Slide the transceiver into the slot until it clicks into place.
6. Connect the other end of the cable into an SFP+ slot on another
network device.
7. Repeat this procedure to install additional transceivers.
Note
To remove the connector and cable from the slot, gently push on the
connector, pull on the release tab, and slide the connector from the
slot.
2 5
2 7
2 6
2 5
2 7
2 6