Figure 5: At-X530-28Gpxm Twisted Pair Ports 1-24 Leds; Table 6: At-X530-28Gpxm Twisted Pair Ports 1 - 24 Led Functions - Allied Telesis x530 Series Installation Manual
Stackable gigabit layer 3+ ethernet switches alliedware plus v5.4.8-2
Hide thumbs
Also See for x530 Series:
- Quick installation manual (24 pages) ,
- Installation manual (200 pages)
Table of Contents
Advertisement
Chapter 1: Overview
LED
L/A
26
AT-x530-28GPXm
The AT-x530-28GPXm LEDs indicate Link/Activity (L/A) and PoE
(PD ON/PD ERR/MAX CURRENT) information. These LEDs are shown in
Figure 5.
Figure 5. AT-x530-28GPXm Twisted Pair Ports 1-24 LEDs
The states of the AT-x530-28GPXm LEDs are described in Table 6.
Table 6. AT-x530-28GPXm Twisted Pair Ports 1 - 24 LED Functions
Ports
State
Solid Green
Flashing
Green
1 - 24
Solid Green
Flashing
Green
Solid Amber
Flashing
1 - 24
Amber
Off
L/A LED
PoE LED
7
9
11
13
8
0
2
Description
The port has established a 1 Gbps link to a network
device.
The port is transmitting or receiving data at 1 Gbps.
The port has established a 1 Gbps link to a network
device.
The port is transmitting or receiving data at
1 Gbps.
The port has established a 100 Mbps link to a
network device.
The port is transmitting or receiving data at
100 Mbps.
Possible causes of this state are:
- The port has not established a link with another
network device.
- The LEDs are turned off. To turn on the LEDs, use
the eco-friendly button.
15
17
6
8
Advertisement
Table of Contents
