Chapter 1: Overview
32
The LEDs display link status and activity. The possible LED states are
described in Table 8.
Table 8. Link and Activity Status LEDs for the 1 Gbps and 10 Gbps Ports
State
Solid Green
Flashing Green
Solid Amber
Flashing Amber
Off
Description
The transceiver has established a 10 Gbps
link to a network device.
The transceiver is transmitting or receiving
data in 10 Gbps.
The transceiver has established a 1 Gbps
link to a network device.
The transceiver is transmitting or receiving
data in 1 Gbps.
Possible causes of this state are:
- The slot is empty.
- The transceiver has not established a link
to a network device.
- A non-supported module is installed.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.