Allied Telesis x530 Series Installation Manual page 27

Table 6. AT-x530-28GPXm Twisted Pair Ports 1 - 24 LED Functions (Continued)
LED Ports
Solid Green
Solid Amber
Flashing
Amber
PoE 1 - 24
Off
State
PD On - The switch is delivering power to a
powered device connected to the port.
PD Error - The switch has shut down PoE on the
port because of a fault condition.
PD Max Current - The switch has detected a
powered device on the port but is not delivering
power to it because doing so would exceed its
available power budget.
No PD - This LED state can result from the following
conditions:
- The port is not connected to a powered device or
the device is powered off.
- The port is disabled in the management software.
- PoE is disabled on the port.
- The LEDs are turned off. To turn on the LEDs, use
the eco-friendly button.
x530 Series Installation Guide for Virtual Chassis Stacking
Description
27