Features; X530 Models; Twisted Pair Ports; Table 1: Basic Features - Allied Telesis x530 Series Installation Manual

Features

x530 Models

Twisted Pair
Ports
The Allied Telesis x530 Series switches are stackable Gigabit, Layer 3+
Ethernet switches. The following sections list the features.
Table 1 lists the basic features for each switch model.
100 Mbps
and 1 Gbps
Model
Pair Ports
AT-x530-28GTXm
AT-x530-28GPXm
(PoE+)
Both switch models come with two pre-installed power supplies. They are
not field-replaceable.
The twenty-four twisted pair ports on the AT-x530-28GTXm switch have
these features:
Ports 1 to 24 support 100 Mbps and 1 Gbps operation

100 meters (328 feet) maximum operating distance per port

Auto-Negotiation for speed

Full-duplex mode only

MDI/MDI-X at 100 Mbps

Port Link/Activity (L/A) and Duplex/Collision (D/C) LEDs

The twenty-four twisted pair ports on the AT-x530-28GPXm switch have
these features:
Ports 1 to 24 support 100 Mbps and 1 Gbps operation

100 meters (328 feet) maximum operating distance per port

Auto-Negotiation for speed

Full-duplex mode only

MDI/MDI-X at 100 Mbps

Power over Ethernet (PoE+) supported on all 24 ports

Port Link/Activity (L/A) and Power over Ethernet (PoE) LEDs

x530 Series Installation Guide for Virtual Chassis Stacking
Table 1. Basic Features
100 Mbps
and 1 Gbps
PoE+
Twisted
Twisted
Pair Ports
24 0
0 24
SFP+
Transceiver VCStack
Slots
4 Yes
4 Yes
19