4. Press Enter.
You are prompted for a user name and password.
5. When prompted, type a user name and password to log on the switch.
If this is the initial management session, enter "manager" as the user
name and "friend" as the password. The user name and password are
case sensitive.
The local management session starts when the User Exec mode
prompts:
awplus>
Note
The User Exec mode is the first level in the command mode
interface. For complete information on the modes and commands,
refer to the Software Reference for x530 Series Switches,
AlliedWare Plus Operating System at www.alliedtelesis.com.
6. Go to "Verifying the Stack" on page 102.
x530 Series Installation Guide for Virtual Chassis Stacking
101