Installing Sfp Or Sfp+ Transceivers In At-X530-28Gtxm And At-X530-28Gpxm Switches; Figure 43: Removing The Dust Plug From An Sfp Slot - Allied Telesis x530 Series Installation Manual

Chapter 8: Cabling the Networking Ports
Installing SFP or SFP+ Transceivers in AT-x530-28GTXm and
AT-x530-28GPXm Switches
112
This section contains installation instructions for SFP or SFP+
transceivers in slots 25 to 28 in the AT-x530-28GTXm and
AT-x530-28GPXm switches.
The following illustrations show a transceiver with a duplex LC connector.
The connectors on your transceivers may be different.
To install transceivers, perform the following procedure:
1. Select a slot for the transceiver.
2. If the slot has a dust cover, remove it. Refer to Figure 43.
Figure 43. Removing the Dust Plug from an SFP Slot
3. Remove the transceiver from its shipping container and store the
packaging material in a safe location.
2 5
2
5 G /
2 . 5 G
/ 1 G
/ 1 0 0
2 6
S F P
+
2 7 /
S 1
1 0 G
/
1 G