Figure 16: Accessory Kit Items - Allied Telesis x530 Series Installation Manual

Chapter 3: Beginning the Installation
62
Figure 16 lists the items that are included in the accessory kit. Contact
your Allied Telesis sales representative for assistance if any item is
missing or damaged.
1570
1947
2047
3374
3375
3376
One 2m (6.6 ft) local management
cable with RJ-45 (8P8C) and DB-9
(D-sub 9-pin) connectors.
1417
Two regional AC power cords.
1570
Two or four wall/equipment rack
brackets for the AT-x530-28GTXm or
AT-x530-28GPXm respectively.
Eight or sixteen screws for attaching
the wall/equipment rack brackets to
the AT-x530-28GTXm or AT-x530-
28GPXm respectively:
Length: 6.0mm (0.2 in.)
Diameter: 4.0mm (0.2 in.)
Two or four anchors for concrete
walls for the AT-x530-28GTXm or
AT-x530-28GPXm respectively:
Length: 29.6mm (1.2 in.)
Diameter: 6.0mm (0.2 in.)
Two or four screws for wood or concrete
walls for the AT-x530-28GTXm or AT-
x530-28GPXm respectively:
Length: 32mm (1.3 in.)
Diameter: 4mm (0.2 in.)
Two power cord retaining clips
3376
Four rubber bumper feet
Figure 16. Accessory Kit Items