Table of Contents
Advertisement
5.9
Handling alarm limits in the event of an alarm
Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015
Chapter 5: Alarm processing
A Pressure alarm is displayed.
TMP, arterial, or venous
The actual value is outside the alarm limits.
Example: Arterial pressure.
The alarm limits are flashing.
The pressure display is red.
The blood pump is stopped.
Use the rotary selector to select the green
question mark and press [OK].
The possible causes will be displayed.
Correct the condition causing the alarm.
Press the [START/RESET] key.
The blood pump will start at a slower
speed and gradually increase to the
prescribed rate. Then the required
balancing pumps will start (depending
on the treatment mode).
5-11
Advertisement
Table of Contents
