4.8.8.2
Terminating the treatment
4.8.8.3
Starting reinfusion
Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015
Membrane plasma separation (MPS)
Stop the treatment by pressing the
[STOP] key.
Press the [STOP] key for approx.
3 seconds.
The venous clamp closes.
The blood pump is stopped.
Continue the treatment by pressing the
[START/RESET] key.
or
Disconnect the arterial patient line from
the patient and connect it to the NaCl
solution.
Use the rotary selector to select Start
disconnection? [OK] to confirm! and
press [OK].
When selecting Disconnect without blood
return, the program will go directly to
"Disconnecting the patient" without reinfusion
after a safety prompt (see chapter 4.8.9 on
page 4-79).
Chapter 4: Operation
4-77