Table of Contents
Advertisement
4.12 System parameters
Key sound
Audible alarm volume
Display brightness
Functional test sequence
Version
Line system
Tubing arrangement
Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015
Note
The responsible organisation should define the most important
configurable parameter settings itself, or confirm the default values and
have these set by service support as required.
The audible feedback indicating that a key was pressed can be turned
on or off.
The volume of audible signals can be adjusted in this field.
The brightness of the screen can be adjusted from 50–100% in
increments of 5%.
When Detailed is selected, all test steps will be displayed on the
screen. When Automatic is selected, only the display test will be
shown.
This field can be used to view the software version.
If "Standard" or "Cassette" is selected, then the screen will support the
insertion of the line system as appropriate. If a treatment mode has
been chosen where no selection is possible, then the menu field is
greyed out.
When Detailed is selected, the installation of the line system will be
shown step by step. When Complete is selected, the fully inserted line
system will be displayed.
The System parameters menu can be
accessed at any time. The fields Key sound,
Audible alarm volume, and Display
brightness can always be changed. All other
parameter fields and submenus are available
only until Start priming is executed for the
tubing system or at the end of the treatment.
For Ci-Ca treatments, the Cassette for
adults is selected under Line system and
cannot be changed. The field mDL settings
is only available when an mDL is integrated
and activated.
The selected field must be confirmed by
pressing the rotary selector [OK].
Chapter 4: Operation
System parameters
4-119
Advertisement
Table of Contents
