Table of Contents
Advertisement
Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015
Note
After turning the device off, wait for approximately 10 seconds before
turning it on again.
Tip
If used tubing systems are still present in the blood circuit module, these
can be removed by opening the pump cover and pressing the
[START/RESET] key.
Connect the device to the power supply.
Connect the equipotential bonding
connector to the rear of the multiFiltrate
device.
Press the power switch on the rear of the
device.
The green LED is illuminated.
All systems are supplied with voltage.
The battery is being charged.
Press the [On/Off] key for approx.
3 seconds until the yellow LED is
illuminated.
The processor check starts automatically.
The software version (X.X) and the language
version ("en" for English) are displayed.
Chapter 4: Operation
4-13
Advertisement
Table of Contents
