Table of Contents
Advertisement
Chapter 4: Operation
Haemoperfusion (HP)
4.10 Haemoperfusion (HP)
4.10.1 Starting conditions
4.10.2 Inserting the cassette system or AV set
4.10.2.1 Inserting the cassette system
4-92
Make the device ready for operation (see chapter 4.4 on page 4-12).
Warning
The information in the accompanying documents for the adsorber used
must also be observed.
Note
Each treatment mode has its individual starting conditions.
The operator must ensure that the starting conditions are met before
using the rotary selector to select Conditions fulfilled and pressing
[OK].
When using an AV set continue with "Inserting the arterial blood line
system" (see chapter 4.10.2.2 on page 4-93)
Note
If a cassette is used for HP treatment therapy, the filtrate line system
has to be inserted but will not be taken into consideration by the device.
Fresenius Medical Care multiFiltrate IFU-EN-UK 15A-2015
Insert the cassette system according to
the instructions.
Turn the rotary selector clockwise until the
next screen displays.
Continue with "Inserting the heparin
syringe" (see chapter 4.10.3 on
page 4-94)
Advertisement
Table of Contents
