Preset - Polycom RealPresence Group Series Reference Manual

preset

Sets the presets or goes (moves) to the presets for the near or far camera source. Also registers or
unregisters the API session to give notification when the user sets or goes to presets.
Syntax
preset <register|unregister>
preset register get
preset far <go|set> <{0..15}>
preset near <go|set> <{0..99}>
Parameter Description
Registers the system to give notification when
register
the user or far site sets or goes to a preset.
Returns the current preset registration state
when followed by the get parameter.
Disables register mode.
unregister
Specifies the far camera. Requires a set or
far
go parameter and a preset identifier.
Moves the camera to a camera preset.
go
Requires a "preset" parameter.
Sets a camera preset. Requires a "preset"
set
parameter.
Camera preset identifier. Must be an integer in
{0..15},
the range {0..15} for a far-site camera or
{0..99}
{0..99} for a near-site camera.
Specifies the near camera. Requires a set or
near
go parameter and a preset identifier.
Feedback Examples
● preset register
returns
preset registered
● preset near go 1
returns
preset near go 1
and moves the near-site camera to the preset 1 position
● preset near set 2
returns
preset near set 2
and saves the current location/position of the near-site camera as preset 2
Polycom, Inc.
System Commands
User
Accessible Additional Restrictions
306