Systemsetting Cameracontent2 - Polycom RealPresence Group Series Reference Manual

systemsetting cameracontent2

Gets the current setting or specifies Camera 3 as a People or Content source.
Syntax
systemsetting cameracontent2 <People|Content>
systemsetting get cameracontent2
Parameter Description
Returns the current setting.
get
Specifies camera as a People source.
People
Specifies camera as a Content source.
Content
Feedback Examples
● systemsetting cameracontent2 People
returns
systemsetting cameracontent2 People
● systemsetting cameracontent2 Content
returns
systemsetting cameracontent2 Content
● systemsetting get cameracontent2
returns
systemsetting cameracontent2 Content
Limitations
Command is not supported on RealPresence Group 300, 310, and 500 systems.
Comments
None
Polycom, Inc.
System Commands
User
Accessible Additional Restrictions
✓
354