Polycom RealPresence Group Series Reference Manual page 159

Parameter
mode
participant
pip
speed
wake
Polycom, Inc.
Description
Set the tracking mode for the Polycom
EagleEye Producer or EagleEye Director
camera.
EagleEye Director:
voice - Camera tracking that switches to
room view before moving to the next
speaker.
director - Direct Cut tracking that
positions the camera to move directly
from one speaker to the next.
EagleEye Director II and EagleEye
Producer:
group - Camera tracking and framing
based on the Frame Group of
participants in the room.
speaker - Camera tracking and framing
based on the Frame Speaker in the room.
EagleEye Producer:
groupwithtransition
tracking and framing based on the Frame
Group with Transition of participants in
the room.
Sets the Participant feature for the
Polycom EagleEye Producer camera to
enabled ( on ) or disabled (
Sets the Picture in Picture setting of the
Polycom EagleEye Director II camera to
enabled ( on ) or disabled (
Sets the rate at which a Polycom
EagleEye Director or Polycom EagleEye
Producer detects active speakers to
slow , normal , or fast .
Camera tracking must be enabled.
Sets the Auto Wake-up feature for the
Polycom EagleEye Producer camera to
enabled ( on ) or disabled (
To use these commands, you must go to
Admin Settings > System Settings >
Polycom Labs in the web interface and
enable the Auto Wake-up feature for the
EagleEye Producer camera.
User
Accessible
✓
- Camera
✓
off ).
✟
off ).
✓
✓
off ).
System Commands
Additional Restrictions
168