Monitor1Screensaveroutput - Polycom RealPresence Group Series Reference Manual

monitor1screensaveroutput

Gets the current setting or sets whether to send either black video or "No Signal" to Monitor 1 when the
screen saver activates.
Syntax
monitor1screensaveroutput <get|black|no_signal>
Parameter Description
Returns the current setting.
get
Sends black video to Monitor 1 when the
black
system goes to sleep and the screen saver
activates.
Sends no signal to Monitor 1 when the system
no_signal
goes to sleep and the screen saver activates.
Feedback Examples
● monitor1screensaveroutput black
returns
monitor1screensaveroutput black
● monitor1screensaveroutput no_signal
returns
monitor1screensaveroutput no_signal
● monitor1screensaveroutput get
returns
monitor1screensaveroutput no_signal
Limitations
None
Comments
Setting Monitor 1 automatically sets Monitor 2 to the same setting.
See Also
See the monitor2screensaveroutput
Polycom, Inc.
command.
System Commands
User
Accessible Additional Restrictions
✓
281