Getconfiguredipaddress - Polycom RealPresence Group Series Reference Manual

getconfiguredipaddress

Retrieves the currently configured IPv4 address from the system.
Syntax
getconfiguredipaddress
User Accessible
Yes
Additional Restrictions
None
Feedback Examples
● getconfiguredipaddress
returns
getconfiguredipaddress 1.2.3.4
Limitations
None
Comments
getconfiguredipaddress returns the currently configured IPv4 address of the system regardless of the
status of the LAN connection. This differs from the ipaddress get command, which returns the current
IP address of the system if it has an active LAN connection, else it returns 0.0.0.0.
The definition of "currently configured IPv4 address" depends on the IPv4 address configuration settings:
● If the IP address is set manually the configured IP address is returned, regardless of whether the LAN
connection is currently active.
● If the IP address is obtained automatically, the currently-assigned address is returned, or 0.0.0.0 is
returned if there is no active connection.
Polycom, Inc.
System Commands
238