Polycom RealPresence Group Series Reference Manual page 26

Polycom EagleEye III Camera as the Second Camera
You can connect a Polycom EagleEye III camera (part number 1624-08283-002, 8200-63730-001, or
8200-63740-001) to a Polycom RealPresence Group 700 system as the second camera.
Option 1
● HDCI Analog Camera Cable
● Power supply. Power supply is required when the camera is not connected directly to the
RealPresence Group Series system using HDCI, or when the HDCI cable is longer than 10 meters.
Use only the approved power supply from Polycom (part number 1465-52748-040). Do not exceed
12 Volts at 3 Amps. Verify the polarity of the power supply as shown on the Polycom camera next to
the power supply input.
Connect to a Polycom EagleEye III Camera to a Polycom RealPresence Group 700 System
as a Second Camera (Option 1):
1 2
100-240VAC 50/60Hz 2.3A
Option 2
● A—Two HDCI Camera Break-Out Analog Cable
● B—Coaxial analog video cables
● C—DB-9 serial cable
● Power supply. Power supply is required when the camera is not connected directly to the
RealPresence Group Series system using HDCI, or when the HDCI cable is longer than 10 meters.
Use only the approved power supply from Polycom (part number 1465-52748-040). Do not exceed
12 Volts at 3 Amps. Verify the polarity of the power supply as shown on the Polycom camera next to
the power supply input.
Polycom, Inc.
4
3
2
2
1 2 3
Room Integration
35