Systemsetting Cameracontent3 - Polycom RealPresence Group Series Reference Manual

systemsetting cameracontent3

Gets the current setting or specifies Camera 4 as a people or content source.
Syntax
systemsetting cameracontent3 <People|Content>
systemsetting get cameracontent3
Parameter Description
Returns the current setting.
get
Specifies camera as a people source.
People
Specifies camera as a content source.
Content
Feedback Examples
● systemsetting cameracontent3 People
returns
systemsetting cameracontent3 People
● systemsetting cameracontent3 content
returns
systemsetting cameracontent3 Content
● systemsetting get cameracontent3
returns
systemsetting cameracontent3 People
Limitations
Command is not supported on RealPresence Group 300, 310, and 500 systems.
Comments
None
Polycom, Inc.
System Commands
User
Accessible Additional Restrictions
✓
355