Systemsetting Bfcptransportprotocol - Polycom RealPresence Group Series Reference Manual

systemsetting bfcptransportprotocol

Gets the current setting or indicates the Binary Floor Control Protocol (BFCP) connection and provides an
option to set the connection preference to UDP or TCP.
Syntax
systemsetting bfcptransportprotocol <Prefer_UDP|Prefer_TCP|UDP_Only|TCP_Only>
systemsetting get bfcptransportprotocol
Parameter Description
Returns the current setting.
get
Specifies TCP as the BFCP connection
Prefer_TCP
preference.
Specifies UDP as the BFCP connection
Prefer_UDP
preference.
Specifies UDP as the BFCP transport protocol.
UDP_Only
Specifies TCP as the BFCP transport protocol.
TCP_Only
Feedback Examples
● systemsetting get bfcptransportprotocol
returns
systemsetting bfcptransportprotocol Prefer_UDP
● systemsetting bfcptransportprotocol Prefer_TCP
returns
systemsetting bfcptransportprotocol Prefer_TCP
● systemsetting get bfcptransportprotocol
returns
systemsetting bfcptransportprotocol Prefer_TCP
● systemsetting bfcptransportprotocol UDP_Only
returns
systemsetting bfcptransportprotocol UDP_Only
Limitations
None
Comments
The BFCP Transport Protocol in which your system is operating determines which protocol is required.
Polycom, Inc.
System Commands
User
Accessible Additional Restrictions
351