Polycom RealPresence Group Series Reference Manual page 203

System Commands
" langid="
" displayname="testGroup
" name="testGroup ">
<multisitename meeting_name="testGroup " />
<multisitespeed meeting_speed="auto"/>
<multisitename0 site_name_0="dawn "/>
<mulitsitetype0 site_type_0="2" type_0="1000"/>
<mulitsiteprefcalltype0 pref_call_type_0="H323"/>
<multisiteuniqueid0 unique_id_0="local:28"/>
<multisitename1 site_name_1="dawn2 "/>
<mulitsitetype1 site_type_1="2" type_1="1000"/>
<mulitsiteprefcalltype1 pref_call_type_1="H323"/>
<multisiteuniqueid1 unique_id_1="local:30"/>
<multisitename2 site_name_2="dawn3 "/>
<mulitsitetype2 site_type_2="2" type_2="1000"/>
<mulitsiteprefcalltype2 pref_call_type_2="H323"/>
<multisiteuniqueid2 unique_id_2="local:29"/>
</address>
</entrytype>
<entrytype type="group" name="testGroup1" filename="testGroup1"
uniqueid="local:38">
<address filename="testGroup1
" langid="
" displayname="testGroup1
" name="testGroup1">
<multisitename meeting_name="testGroup1" />
<multisitespeed meeting_speed="auto"/>
</address>
</entrytype>
</addresses>
</xml>
exportdirectory done
Limitations
None
Comments
exportdirectory done indicates that all directory data has been exported.
When the system uses the Maximum security profile, this command is available only to Administrators.
Do not use the exportdirectory command to interpret the data that is returned. Simply store and use
the data as input to the importdirectory command or import directory utility in the web interface. The
format of the exported directory data might change in future software releases and any application
attempting to interpret the data could find its ability to do so compromised in later releases of Polycom
RealPresence Group Series software.
Polycom, Inc. 212